Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose Unilock Construction
Construction Garland provides independent Unilock construction service in Garland, focused on hardscape installation and repair: paver patios, paver driveways, driveway replacement, and the retaining wall systems that hold those surfaces in place. What makes our Unilock work different is focus. We treat base prep, polymeric jointing, and wall-unit detailing as the whole job, not a side line to roofing and kitchen work, so we read a failing subbase or a spalled paver edge on sight.
We’re an independent provider. Construction Garland is not affiliated with, authorized by, or a dealer for Unilock, and we don’t claim to be. We install and service Unilock products with quality components that fit them, and we say plainly when a repair won’t hold. Our technicians have up to 10 years of experience. Call (888) 405-7616 to schedule a free estimate.
Why Trust Construction Garland for Your Unilock Construction?
Unilock systems have specific rules: a stabilized subbase under expansive clay, correct compaction in lifts, universal edge restraint spiked into sound soil, and manufacturer-specified polymeric joint sand applied at the right depth. Miss any one of those and the surface telegraphs the error within a season or two. Our technicians work to those rules because getting the base right is the only thing that makes the pavers last.
We use genuine Unilock units, universal edge restraint, and joint sand matched to the manufacturer’s spec so color, thickness, and interlock line up with what’s already down. Aftermarket lookalikes rarely match dimension or hue, and the mismatch shows through the field. That’s also why our work is warranty-safe: we follow installation practice that supports the manufacturer’s coverage rather than voiding it.
The bigger reason homeowners in Garland trust us with Unilock work is scope. One contractor handles the patio, the driveway, and the wall detail, so no one blames the base guy for the joint sand problem. That accountability is worth more than any single paver line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Garland
Unilock pavers are durable. The failures we see in Garland almost always trace back to what’s underneath them or how the joints and edges were finished. Here’s what comes up most.
- Rocking and heaving on Brussels Block and Bristol Valley. The field rocks because the base was compacted in lifts that were too deep, or placed straight over Garland’s expansive clay without a stabilized subbase. Water finds the low spot, the clay moves, and the paver goes with it.
- Polymeric sand joints washing out or cracking. Joints under-filled at install, or filled with the wrong grade of joint sand, open up and let seed and water in. Once that happens the joint fails fast, and the whole field starts to move.
- Efflorescence and salt bloom on gray-toned units. White bloom on pavers and wall units usually means water is trapped behind or beneath the system with no weep points or drainage path to get out. The salt comes to the surface because it has nowhere else to go.
- Edge restraint failure and paver creep. At driveway aprons and on curves, undersized spikes or restraint set on loose soil let the edge give. Once the edge moves, the pavers behind it creep, and gaps open across the field.
- Beacon Hill and Pisa wall settlement or lean. Missing geogrid in the retained mass, or backfill that isn’t free-draining, pushes the wall out of plumb. A lean isn’t cosmetic. It’s a structural warning about what’s behind the block.
A driveway or patio of Brussels Block pavers starts to rock and pond after a couple of seasons, with the heaved area usually tracking back to a base that went down over Garland’s expansive clay without enough depth, compaction, or drainage. A qualified hardscape crew pulls the affected field pavers, resets the base in shallower compacted lifts with proper slope away from the structure, re-lays the units over an edge restraint, and re-joints with polymeric sand matched to the manufacturer’s spec.
Unilock Parts & Our Repair-vs-Replace Approach
Our default is genuine Unilock units, universal edge restraint, and joint sand that matches the manufacturer’s specification. We don’t stock OEM or genuine Unilock parts, and we don’t claim to. What we do is source the component that matches what’s already installed so the repair disappears into the field instead of announcing itself.
The repair-or-replace call is usually straightforward once the base is exposed. A single cracked field paver or a settled corner is an honest spot repair: pull the unit, re-level the bedding, reset, re-joint. Widespread heaving or a wall that’s leaning past plumb is different. Rebuilding the stabilized base and the retained mass is the only fix that holds through the next wet-dry cycle, and we’ll tell you that plainly rather than take money for a patch that fails by spring.
If your pavers are moving, call (888) 405-7616 for a free estimate and a straight answer on which path makes sense.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the surface and the wall, note where the field rocks, where water ponds, and how the edge restraint is sitting. We probe the joint sand depth and look for trapped moisture behind wall units. The goal is finding which component actually failed, not just where it shows.
- 2
Repair or install. For a repair, we lift the affected field, rebuild the base in compacted lifts over a stabilized subbase, and reset the units over sound edge restraint. For a new install, we set the slope and drainage first, then the base, then the field.
- 3
Joint and detail. We re-joint with manufacturer-specified polymeric sand, fill to the correct depth, and compact so the joints lock. We finish the wall detailing with proper weep points and free-draining backfill.
- 4
Warranty review. We walk the finished work with you and confirm it’s installed to the practice the manufacturer’s coverage expects, in writing.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Garland
We work with the Unilock systems Garland homeowners are most likely to have down or want down. That includes Brussels Block pavers in classic and tumbled finishes, and Brussels Dimensional and Brussels Fullnose coping for steps and pool edges. We install and repair Beacon Hill wall block, the Pisa Wall and Pisa2 retaining wall systems, Bristol Valley pavers for driveways and walkways, and Sandon wall units for garden and terrace walls.
Our sub-services under those systems are paver patio installation, paver driveway installation, and full driveway replacement, plus the wall and step detail that ties the outdoor scope together. Call (888) 405-7616 for a free estimate on the specific system you have.
We Also Service These Brands
Unilock isn’t the only line we know. Construction Garland works with a roster of more than 50 industry-leading material brands across every project category, including KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. You choose the material. We bring the expertise to install it correctly.
FAQs – Unilock Construction Service in Garland
No. Construction Garland is an independent provider, not an authorized Unilock dealer, and we’re not affiliated with or certified by the manufacturer. We install and service Unilock products with quality components that fit them, following installation practice that supports the manufacturer’s coverage.
Yes. We use genuine Unilock units, universal edge restraint, and joint sand matched to the manufacturer’s spec so color, thickness, and interlock align with what’s already installed. We don’t claim to stock OEM or genuine parts in advance, but we source the correct component for the job.
A spot repair on a settled corner or a single cracked paver can finish in a day. A rebuilt base or a full paver driveway installation takes longer, and the schedule depends on area, base condition, and drainage. The written estimate sets the scope and timeline before any work starts. Call (888) 405-7616 for a free estimate.
We cover paver systems, retaining wall systems, coping, and wall units: Brussels Block, Brussels Dimensional, Brussels Fullnose coping, Beacon Hill, Pisa and Pisa2, Bristol Valley, and Sandon. That spans paver patios, paver driveways, driveway replacement, and the wall detailing alongside them.
Installing to the manufacturer’s specified practice is what protects your warranty, and that’s how we work. We use the components the system calls for and finish joints and edges to spec. If a prior install went off spec, we’ll tell you what that means for coverage before we start. Call (888) 405-7616 for a free estimate.
These are typical estimated ranges for Garland. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Almost always the base, not the pavers. Garland’s expansive clay swells and shrinks with the wet-dry cycle, and a base compacted in lifts that were too deep, or laid over clay without a stabilized subbase, lets the field move. Fixing it properly means rebuilding the base in shallower compacted lifts with drainage away from the structure.
Sealing helps with surface protection and stain resistance, but it isn’t a fix for movement. Sealing over a base that’s already failing just locks the problem in. Get the base and joints sound first, then seal. Call (888) 405-7616 for a free estimate on what your surface actually needs.
Rarely. Washed-out joints usually mean the sand was under-filled, the wrong grade was used, or water is getting under the field and pushing out. Re-jointing with manufacturer-specified polymeric sand filled to the correct depth fixes the symptom; the drainage is the real issue to check.
A slight lean can sometimes be corrected, but a wall leaning past plumb usually needs the retained mass rebuilt with geogrid and free-draining backfill. Patching the face block without fixing what’s behind it fails again. Call (888) 405-7616 for a free estimate and an honest assessment.
They can be, if the units, thickness, and joint sand are matched to your existing field. Aftermarket lookalikes often don’t match dimension or hue, and the difference shows. We source components that align with what’s installed. Call (888) 405-7616 for a free estimate.
Book Your Unilock Service in Garland, TX
Whether it’s a rocking Brussels Block driveway, a washed-out poly sand joint, or a new paver patio built right over your Garland clay, we’ll give you a written, itemized estimate before any work starts. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.