Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose PGT Construction
We provide independent PGT construction service in Garland, Texas. That means we repair, install and service PGT windows, doors and glass units using quality parts that fit them, and we diagnose the failed component before anyone recommends a full replacement. As an independent provider we are not affiliated with PGT and are not authorized by the manufacturer, so our only loyalty is to getting your opening sealed, rated and working again.
PGT builds aluminum and vinyl windows and sliding glass doors, much of it impact-rated. We work on PGT units in Garland regularly: units in sizes and configurations most big-box installers won’t touch. Our technicians have up to 10 years of experience, and that experience is why we can tell you which part of a PGT unit usually fails first in North Texas heat and hail, and which failures are cosmetic.
Call (888) 405-7616 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We are an independent PGT service provider in Garland, not a PGT dealer and not affiliated with or authorized by the manufacturer.
- Most PGT problems we see here are failed glass sealed units, aluminum sill corrosion, and worn slider rollers and threshold seals.
- Rated glass and exact-match components preserve the impact rating; non-rated aftermarket parts do not.
- Targeted repair usually beats full replacement when the PGT frame, sash and glazing are structurally sound.
- The written, line-item estimate sets the final price. Estimates are free.
Why Trust Construction Garland for Your PGT Construction?
PGT units don’t fail the way generic window stock fails, and they don’t get repaired the same way either. Impact-rated aluminum and vinyl frames carry specific profiles, gaskets, and glazing that a standard window swap will not match. We know those differences before we open the unit.
We use OEM or exact-match glass sealed units, rollers, latches, weatherstrip and screen frames for PGT equipment, so fit and the impact rating are preserved. Aftermarket parts go only into non-rated hardware and trim, where they belong. That distinction is the whole game: put an aftermarket roller in an impact-rated slider and you’ve saved a little on the part and compromised a system that exists to hold a storm out.
We’re also careful with warranty-safe practices. We document what we find, match the original glazing and hardware wherever possible, and avoid alterations that would give a manufacturer a reason to disclaim a claim you might otherwise be entitled to. That’s simply how a careful independent shop works. It’s how a careful independent shop should work on any rated product.
One call gets a PGT window assessment and, if the same storms have been working on the roof, a roof assessment in the same visit. Call (888) 405-7616 to schedule your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Garland
These are the failure modes we actually see on PGT aluminum and vinyl windows and sliding glass doors in Garland. Each one is a component problem first, and a replacement question only after we get eyes on the unit.
- Fogged or hazy impact glass. The sealed unit’s perimeter seal breaks down after years of thermal cycling, so the desiccant inside stops holding moisture and the pane hazes from the inside. It can’t be cleaned out, because there’s nothing to clean: the moisture is between the panes. Usually only the failed sealed unit needs replacing, not the whole window, as long as the frame and sash are sound.
- White pitting and corrosion at aluminum sills and mullion joints. Wind-driven rain parks in the sill pocket and along mullion joints, and where it sits, aluminum pits and the finish lifts. It shows up as chalky white spots in the bottom corners that look like paint failure and behave like metal damage. Caught early, it’s cleanup and re-sealing. Left too long, the frame can thin to the point where replacement becomes the honest answer.
- Sliding glass door drag, misalignment and threshold leaks. Worn rollers flatten, the track loads up with grit, and the leaf drops slightly out of square. The latch stops catching square, the door fights you, and the threshold seal gaps just enough to let water track inward during storms. New rollers, a track reset, fresh weatherstrip and a re-sealed threshold usually bring the door back.
- Sealant and flashing breakdown at the frame-to-opening joint. The leak isn’t the window. Aged exterior sealant and failed flashing let water behind the nail fin, and it shows up on the inside as drywall staining or a soft spot in the corner rather than a visible crack. This is the one Garland homeowners most often blame on the roof, and we cover why further down.
- Hardware and screen wear. Latches, keepers, handles and screen frames take the daily use and go first. If a PGT unit still opens, closes, latches and drains the way it should, hardware is a small, targeted fix and worth doing before anyone talks about replacement.
PGT Parts & Our Repair-vs-Replace Approach
We source OEM or exact-match parts for PGT equipment. We do not claim to stock or carry genuine PGT parts. What we can tell you is that glass sealed units, rollers, latches, weatherstrip and screen frames need to match the original profile, and that’s what we work to.
The repair-or-replace call rests on the frame and the rated assembly, not on how the unit looks. If the aluminum or vinyl frame, sash and glazing are structurally sound, we repair the failed component. If the frame has corroded through at the sill or mullion, or if the impact rating has already been compromised by a prior repair, replacement is the honest answer and we’ll say so. Nobody should pay for a full window because of a worn roller, and nobody should keep patching a frame that’s failing.
Bring us the symptom – fogged pane, sticking slider, water at the sill – and we’ll tell you which side of that line your PGT unit is on. Call (888) 405-7616 for a free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We look at the failed component in context: which pane or panes fogged, where the water is tracking, whether the sill or mullion is pitting, whether the slider is roller wear or a track problem. On Garland homes we also check whether what looks like a window fault is actually coming from above – the roof or the flashing line.
- 2
Repair or install. For repair, we replace the sealed unit, the rollers, latches, weatherstrip or screen frame with exact-match parts, then reset the track and re-seal the frame-to-opening joint. For installation, the new PGT unit is set square, flashed and sealed to the opening, with the impact-rated assembly intact.
- 3
Test. We open, close, latch and drain the unit, confirm the glass is fog-free, and check the seal and trim inside and out so the sill sheds water the way it should.
- 4
Warranty. We document the work and the parts used, keep the fix warranty-safe, and hand you the record. If something we touched doesn’t hold, call and we’ll come back.
PGT Products We Service & Install in Garland
We service and install PGT aluminum impact windows, PGT vinyl impact windows, PGT Premier aluminum windows, and PGT Estate Collection vinyl windows and sliding glass doors. That covers single-hung, fixed, slider and door configurations, in the larger and irregular sizes that a generic window installer tends to decline.
We also handle PGT window replacement and impact window installation as full openings, including new flashing and sealing, so the exterior shell is restored at the same time. When the framing or trim around a PGT opening is damaged, we repair that too. We don’t claim to carry any particular PGT product line in stock – what we do is service and install the PGT units in front of us.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
PGT is one brand in a much larger picture. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on the interior side, so a Garland home’s exterior repair and its next kitchen or bath update can be handled by one accountable team. You choose the material; we bring the expertise to install and service it.
Roof and Envelope Leaks Garland Owners Misdiagnose
When water shows up on interior drywall below a PGT window after a storm, the roof gets blamed first. A lot of the time the roof is fine and the window opening is the culprit, and the reverse happens too: a hail-bruised or lifted shingle above sends water down the wall and shows up at the window sill. Separating the two is a matter of following the stain and checking the flashing line rather than guessing.
In Garland, that matters more than in a newer suburb. Spring hail and severe thunderstorms mean roof, siding and window rebuilds are a recurring seasonal demand here, and the inner-ring housing stock is largely late-1940s through 1970s brick-veneer and frame single-family homes – small 3/2 ranches and cottages near downtown Garland and the Duck Creek corridor, with 1990s-2000s subdivisions east toward Rowlett. Older stock means older openings and more sealant at the end of its life.
The clay underfoot matters too. North Texas blackland clay swells and shrinks with the wet-dry cycle, and in homes near Duck Creek and downtown Garland that shows up as stair-step cracks in the brick and doors that suddenly stick. Before we touch a bathroom or an addition in those neighborhoods, we look for that movement first, because a window that no longer latches square is sometimes telling you about the foundation, not the window.
How a Typical PGT Slider Job Usually Goes
A homeowner notices a PGT impact slider getting stiff and a dark line of moisture creeping along the interior sill after storms. The cause is usually worn rollers and a flattened or gapped threshold seal that lets water track inward, compounded by aged exterior sealant at the frame. A qualified local pro typically pulls the door leaf, replaces OEM-spec rollers and weatherstrip, resets the track, and re-seals the frame-to-opening joint – then checks the aluminum sill for corrosion before deciding whether the unit is still serviceable.
Typical Estimated PGT Service Costs in Garland
These are typical estimated ranges for the work that comes up around PGT windows, doors and the roof above them in Garland. The written estimate sets the final price.
| Work | Typical Estimated Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
Every one of these is an estimate, not a quote. We write the line items out before work starts so you know what you’re approving and what it costs. Call (888) 405-7616 for an exact written estimate.
FAQs – PGT Construction Service in Garland
No. We’re an independent PGT service provider. We are not affiliated with, authorized by, or a dealer for PGT, and we don’t claim to be factory-trained or certified by them. That means we diagnose the failed component rather than defaulting to a full replacement quote.
Yes. We use OEM or exact-match glass sealed units, rollers, latches, weatherstrip and screen frames for PGT windows and doors so the fit and the impact rating are preserved. Aftermarket parts go only into non-rated hardware and trim. We don’t claim to stock or carry genuine PGT parts; we source parts that fit the unit correctly.
A single sealed unit, roller set or hardware repair is usually a short job; a full window replacement or impact window installation takes longer because it involves flashing, sealing and finishing the opening. The written estimate spells out the timeframe per line item. Call (888) 405-7616 and we’ll tell you roughly how long your PGT work should take before you commit.
We cover PGT aluminum impact windows, PGT vinyl impact windows, PGT Premier aluminum windows, and PGT Estate Collection vinyl windows and sliding glass doors. That includes single-hung, fixed, slider and door configurations. If you’re unsure what you have, tell us when you call and we’ll sort it out on site.
Not if it’s done with care. We match original glazing and hardware wherever we can, avoid alterations to the rated assembly, and document the work, because a repair that changes the unit’s rated configuration is where warranty problems usually start. We can’t speak for PGT’s decisions, but we do our part to keep your claim clean. Call (888) 405-7616 if you have a warranty question about your unit.
Window replacement in Garland typically runs $4500 – $15000, and impact window installation typically runs $8000 – $25000, depending on size, count and opening condition. Roof repair that turns out to be part of the envelope picture typically runs $400 – $1800, and a full roof replacement $8000 – $20000. These are estimates; the written, line-item estimate sets the final price. Call (888) 405-7616 for an exact quote.
Yes, usually. A fogged sealed unit is a glass-pack failure, not a frame failure, and if the aluminum or vinyl frame, sash and glazing are structurally sound, replacing just the failed sealed unit with an exact-match glass pack restores the window and keeps the impact rating intact. Call (888) 405-7616 and we’ll confirm on site whether your frame is sound enough to justify it.
That’s corrosion from water sitting in the sill pocket and mullion joints after wind-driven rain. It reads like paint failure but it’s the aluminum itself pitting. Caught early it’s a clean-up and re-seal; if the metal has thinned through, replacement becomes the honest call. Call (888) 405-7616 for a free assessment of the sill.
Not usually. That combination points to worn rollers, a misaligned track and a flattened threshold seal, plus aged exterior sealant at the frame. New OEM-spec rollers, weatherstrip, a track reset and a re-sealed frame-to-opening joint typically fix it. We check the aluminum sill for corrosion first to confirm the unit is still worth repairing. Call (888) 405-7616 for a free estimate.
Yes. If the original opening was impact-rated, the replacement glass and assembly need to match that rating, or the opening loses the protection it was built for. We use exact-match glass packs for PGT units for exactly that reason. Call (888) 405-7616 and we’ll walk through the rating on your opening before ordering anything.
Yes, and it’s common. Failed sealant or flashing at the frame-to-opening joint lets water behind the nail fin, and it shows up as interior drywall staining rather than a visible crack. The reverse also happens – a lifted shingle above sends water down the wall to the window sill. Call (888) 405-7616 for a free estimate and we’ll trace the stain to the actual source.
Book Your PGT Service in Garland, TX
Fogged impact glass, a stiff slider, water at the sill, or a roof leak you can’t trace – we’ll diagnose it honestly and fix the failed part instead of selling you a window you don’t need. Free estimate, written line items, workmanship warranty. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.