Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Garland, TX – cabinet installation, refacing, full kitchen remodeling and the countertops that finish the job. What sets our KraftMaid work apart is that we treat the cabinet box, the hinge and the finish as three separate problems with three separate fixes, instead of quoting a full tear-out the moment a door rubs a stile. We’re an independent provider, not an authorized KraftMaid dealer or affiliate, and we say so up front.
That independence matters in Garland. The city’s housing was built largely around the former Ordinance Plant and the Lake Ray Hubbard boom years, which means most of the kitchen work here is renovation of 1950s through 1970s single-family homes, not new construction on the edge of town. KraftMaid cabinets land in those older kitchens, on slabs that have been moving for decades. Our technicians have up to 10 years of experience with exactly that situation. Call (888) 405-7616 for a free estimate.
Why Trust Construction Garland for Your KraftMaid Construction?
KraftMaid spans a wide reality. The Waypoint line is a framed stock cabinet sold through Home Depot. The Vantage and semi-custom framed lines run in Maple and Oak. Door styles range from full-overlay Shaker to raised panel. We work across all of that: the box construction, the door and drawer front geometry, and the finish lines each behave differently, and a technician who treats them as one product will misdiagnose half of what he sees.
We use quality parts that fit KraftMaid equipment, and we work warranty-safe. That means we don’t drill new hinge-bore patterns into a door when the original screw holes can be filled and re-set. We don’t sand through a factory finish to hide a rub mark. When the box is sound, we rehang, reface or re-box individual units rather than pushing a replacement run.
The same discipline carries across the rest of a Garland remodel. Cambria, Silestone and Kohler sit alongside KraftMaid in the same scope, and one team handles the cabinet, the countertop and the plumbing fixture so nobody blames the other trade for a bad reveal. Written line-item quotes. Fixed pricing with no change orders.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Garland
- Sink base and dishwasher-opening swelling. Particleboard and plywood boxes absorb water at the cut edges around the sink and the dishwasher bay. A slow supply-line drip or years of Garland humidity swings wick moisture into the substrate, and the bottom of the box delaminates before the homeowner notices the leak. By the time the cabinet smells, the box has usually been swelling for a while.
- Full-overlay doors and drawer fronts out of alignment. Full-overlay fronts leave almost no margin, so a hinge that has loosened in the stile shows up as a door that rubs its neighbor or a drawer front that sits proud. In Garland, a shifting slab usually gets some of the blame: when the floor slopes, the cabinet run racks slightly and the reveal lines drift. Sticking doors in a kitchen often trace back to the foundation, not the cabinet.
- Finish wear and edge peeling near the range and dishwasher. Painted and thermofoil-style fronts take heat and steam where the range and dishwasher sit. Edges lift, film peels, and the finish dulls in a band the width of the appliance. Left alone, moisture gets under the peeled edge and the substrate starts to go.
- Toe-kick, filler and end-panel separation. Cabinets set on an uneven slab or pushed against an out-of-plumb Garland wall open gaps at the toe-kick, the filler strips and the end panels. It reads as sloppy installation, but the cause is usually the floor and the wall, not the cabinet.
- Sagging hinges and rubbed stiles after years of use. Every door cycles hundreds of times a year. Hinges loosen, screws strip out of the frame, and the stile takes the wear. A door that closes hard is often one stripped screw and one adjusted cam away from normal.
KraftMaid Parts & Our Repair-vs-Replace Approach
We don’t stock OEM or genuine KraftMaid parts, and we won’t tell you otherwise. What we do is source parts that fit: genuine KraftMaid hinges, drawer glides and touch-up and finish kits where the box is sound, and quality aftermarket soft-close hardware when the original part is discontinued. Fit and function come first. Branding on a hinge doesn’t fix a door.
The repair-versus-replace call comes down to the substrate. If the frame and box are intact, we rehang, reface or re-box the individual cabinet. If the box has swollen or the particleboard has failed, that unit gets replaced, and only that unit. Refacing a swollen sink base just buries the problem behind a new door.
A typical KraftMaid kitchen with framed Maple cabinets shows up as misaligned doors and a sink base whose box has swollen at the bottom after a slow supply-line drip. The cause is usually moisture wicking into the substrate combined with full-overlay hinges loosened in the stiles over time. The fix is to pull the affected base, check the box for delamination, replace or re-box failed units, reset and re-level the run, reinstall hardware with proper screws into the frame, and re-hang the fronts so the reveal lines line up. Call (888) 405-7616 to talk through yours.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the doors, check every box for swelling and delamination, and test each hinge and glide. We check the run for level and plumb against the slab and wall, because a Garland floor that has moved will undo a perfect cabinet install.
- 2
Repair or install. We rehang, reface or re-box what can be saved and replace only the failed units. On a new KraftMaid install, we set the run level, shim to the wall, and fasten through the frame so the boxes don’t rack.
- 3
Test. Every door and drawer gets cycled. We check the reveal lines, the soft-close action and the clearance at the range and dishwasher. If a front rubs, we adjust before we leave.
- 4
Warranty. We back our workmanship and put the scope in writing, so what we touched and what we didn’t is clear on paper.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Garland
We service and install the KraftMaid product types a Garland home actually has: framed stock and semi-custom kitchen cabinets in Maple and Oak, full-overlay Shaker and raised-panel door fronts, and the modular and vanity cabinet lines used in baths. We handle cabinet installation and refacing, full kitchen remodeling, and the quartz and granite countertops that sit on top of them.
In Garland’s older homes, that work often comes with foundation repair and brick crack remediation on the same punch list. The expansive clay under Duck Creek-area and downtown Garland homes swells and shrinks with the wet-dry cycle, and we look for stair-step cracks in the brick and sloping floors before we touch a bathroom or an addition. Call (888) 405-7616 with your cabinet or kitchen scope and we’ll put a written estimate together.
We Also Service These Brands
The kitchen doesn’t stop at the cabinets. Cambria, Silestone and Caesarstone cover the countertop, and Kohler and Toto cover the fixtures in the bath and kitchen. That breadth means you choose the material and we bring the expertise, rather than fitting your kitchen around what one supplier happens to stock. Garland homeowners get one team for the cabinets, the counters and the fixtures.
FAQs – KraftMaid Construction Service in Garland
No. We are an independent KraftMaid service provider in Garland, not a KraftMaid dealer and not affiliated with or authorized by the manufacturer. We repair, install and service KraftMaid cabinets with quality parts that fit them, and our credibility comes from the work, not from a manufacturer relationship.
Yes. We use genuine KraftMaid hinges, drawer glides and touch-up and finish kits where the box is sound, and quality aftermarket soft-close hardware when the original part is discontinued. We don’t stock OEM parts, so we source what fits the cabinet in front of us. Call (888) 405-7616 if you’re unsure what your cabinet needs.
Often yes, but not always, and we won’t promise it before we check. When a finish is discontinued, the practical options are a matched replacement door from remaining stock, a reface of the whole run so the finish stays consistent, or a finish touch-up kit for localized wear. A single new door on a faded run rarely matches, so we usually recommend refacing or touching up rather than one odd front. Call (888) 405-7616 and we’ll talk through what your finish can take.
Moisture is wicking into the substrate, usually from a slow supply-line drip or a dishwasher leak at the cut edges of the box. Particleboard and plywood swell and delaminate once water gets in, and the swelling shows up at the bottom of the sink base first. The fix is to pull the base, find and stop the leak, and replace or re-box the failed unit. Refacing over it just hides the damage.
Yes, they go out of alignment, and yes, most can be adjusted. Full-overlay fronts leave little margin, so a hinge that has loosened in the stile shows up fast. A door that rubs is often one stripped screw and one cam adjustment away from closing clean. If the whole run has racked on a sloping Garland slab, the fix starts at the floor. Call (888) 405-7616 to schedule an estimate.
It’s worth refacing when the frame and boxes are intact and only the finish, doors or fronts are worn. It’s worth replacing the individual unit when the box has swollen or the substrate has failed. Replacing a whole run because one sink base went bad is rarely the right call. We’ll tell you which cabinets fall in which group before you spend anything. Call (888) 405-7616 for a free estimate.
Cambria, Silestone and Caesarstone all work, and the choice usually comes down to finish and edge rather than brand. Quartz suits a busy Garland kitchen because it doesn’t need sealing; granite brings a natural look with a little more maintenance. Cabinets stay level and countertops get templated after the boxes are set, so the order matters. Call (888) 405-7616 and we’ll price the cabinet and countertop scope together.
A hinge or glide adjustment is usually a short visit. A reface or a countertop swap runs several days depending on the size of the kitchen and whether custom fronts are involved. A full kitchen remodel is measured in weeks, not days, and the written estimate sets the timeline. Call (888) 405-7616 to get yours scheduled.
We cover framed stock and semi-custom kitchen cabinets in Maple and Oak, full-overlay Shaker and raised-panel door fronts, and the modular and vanity cabinet lines used in baths. That includes installation, refacing, individual re-boxing, hinge and glide service, and finish touch-ups. Call (888) 405-7616 if your cabinet isn’t on that list and we’ll tell you straight.
It can if the work is done wrong, which is why we work warranty-safe. We don’t drill new hinge-bore patterns when the original screw holes can be filled and re-set, and we don’t sand through a factory finish. We can’t speak for KraftMaid’s warranty terms, so ask them directly about your specific cabinet. Call (888) 405-7616 and we’ll keep our work within what the warranty allows.
Typical estimated ranges for Garland are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (888) 405-7616 for an exact quote. Estimates are free.
Book Your KraftMaid Service in Garland, TX
Whether it’s one swollen sink base, a full reface or a KraftMaid kitchen with a Cambria top, we’ll put a written, fixed-price estimate in front of you before anything starts. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.