Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Garland, TX – paver patios, paver driveways, driveway replacement, and retaining wall systems installed and repaired to spec. What sets our Belgard work apart is that we quote the whole assembly, not just the surface: base prep, geotextile separation, compaction, slope, drainage, and joint sand all appear on the written estimate before anyone lifts a paver. We are not authorized, sponsored, or warranty-backed by Belgard. We’re an independent provider, and we specify and install their products often enough to know exactly where they fail on Garland’s clay. Call (888) 405-7616 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Garland for Your Belgard Construction?
Our technicians have up to 10 years of experience with hardscape systems, and that time shows up in the details most quotes skip. Belgard pavers are a quality surface. They are also only as good as what sits under them, and North Texas blackland clay punishes a thin base like nowhere else. We read the existing assembly before we price a fix: how deep the crushed stone runs, whether geotextile separates it from the clay, where the water goes when it rains, and how the polymeric sand was placed.
We work with quality parts that fit Belgard equipment. Matching paver and wall units get sourced to the existing run where color lots allow, and caps, joint sand, and drainage fittings are chosen to work with the system rather than against it. Warranty-safe practice matters too. We don’t bury a sound Belgard surface under a shortcut, and we don’t void coverage by installing outside the manufacturer’s written guidance for base depth, edge restraint, and joint fill. If a surface can be lifted, re-based, and re-jointed instead of torn out, that’s the number you’ll see on the estimate. You choose the material; we bring the expertise on how it’s assembled in Garland clay. Call (888) 405-7616 for a free written, line-item quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Garland
Hardscape failures here almost always trace back to water and clay, not to the paver itself. These are the problems we see across Garland most often.
- Efflorescence and white hazing on darker pavers. That chalky bloom across Belgard Lafitt Rustic Slab and Catalina Grana surfaces is mineral salt migrating to the face as moisture moves through the assembly. It shows up most on darker colors, and it points to trapped moisture – poor slope, a base that holds water, or joint sand that failed and let rain straight in. A proper acidic wash clears the bloom, but the drainage has to be corrected or it returns.
- Edge raveling and paver heave. When a Belgard patio or driveway was set on a thin base over Garland’s expansive clay, the soil swells in a wet spring and shrinks in a dry summer. The pavers move with it. Edges ravel, single units rock, and the field heaves in a wave. The fix is a properly compacted, geotextile-separated sub-base, not a surface patch.
- Wall block creep and bulging. Belgard Mega Arbel and Belair wall systems built without geogrid or with the wrong batter start to lean and bulge, and it gets worse fast where a downspout discharges right behind the wall. Water loads the backfill and the wall walks outward. Rebuilding the drainage and adding grid is often the difference between a repair and a full rebuild.
- Joint sand washout and paver migration. Polymeric sand applied wet, or over a damp surface, never locks properly. After a hard North Texas rain it washes out of the joints at driveway aprons and patio edges, and the pavers start to spread. Fresh sand installed dry and activated correctly holds far better.
- Settling at the driveway apron. The apron takes vehicle weight and runoff at the same time. Where the transition to concrete or the street was built with too little base or no edge restraint, Belgard Dimensions Slab and Cambridge Cobble driveways drop and rock at that seam. Trimming out and re-basing the apron fixes it without touching the rest of the field.
Here’s how this kind of job usually goes. A homeowner notices white chalky staining spreading across a Belgard patio and a few pavers rocking or dropping at the edge after rain. The usual cause is trapped moisture in the base – insufficient slope, missing geotextile over clay, or polymeric sand that failed – letting fines migrate and the surface settle unevenly. A qualified hardscape crew lifts the affected field, resets it on a re-compacted and corrected base with proper fall away from the house, cleans efflorescence with the right acidic wash, and re-joints with fresh polymeric sand.
Belgard Parts & Our Repair-vs-Replace Approach
Belgard OEM pavers, wall units, caps, and their matching polymeric sand should be matched to the existing run or lot when repairing. Color lots vary between production runs, and blending a fresh batch from a different dye lot against a weathered field shows – it reads as a patch from across the yard. Where a match isn’t possible, we plan the repair so the variance sits at an edge or a natural break rather than in the middle of the field.
For the base and drainage assembly, quality matters more than brand name. Geotextile, properly compacted crushed stone, edge restraint, and drainage fittings do the structural work. This is the part most Garland quotes get thin, and it’s the part that fails first. A failing patio is usually a base and drainage problem, not a paver problem, so patch-and-rebase often beats tearing out a sound surface and starting over. The written estimate sets the final price, and the scope is spelled out line by line before we start. Call (888) 405-7616 to talk through your options.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We inspect the assembly, not just the surface: base depth and material, geotextile presence, slope and fall away from the house, edge restraint, drainage discharge points, and joint sand condition. On a retaining wall we check batter and look for geogrid and water behind the block.
- 2
Written line-item estimate. You get the scope broken out – lift, re-base, compaction, geotextile, drainage, pavers, joint sand – so you can judge a quote by its base and drainage spec, not just the paver pattern. The price is set per job by that written estimate.
- 3
Repair or install. We lift and set aside reusable Belgard units, correct and re-compact the base, install geotextile separation over the clay, reset the field with proper fall, and re-joint with fresh polymeric sand. New installs follow the same sequence from bare ground.
- 4
Test and hand-off. We check slope and drainage with water, confirm joints are filled and edges are restrained, and walk the finished surface with you.
- 5
Workmanship warranty and follow-up. Our workmanship is backed by warranty. If something shifts or the joints wash out under normal conditions, we come back and correct it.
Belgard Products We Service & Install in Garland
We service and install Belgard paver patio systems (including Lafitt Rustic Slab, Catalina Grana, Dimensions Slab, and Cambridge Cobble lines), Belgard retaining wall systems such as Mega Arbel and Belair wall block, paver driveways and driveway replacement, walkways and pool surrounds, steps and caps, and the drainage, edge restraint, and polymeric joint sand that complete the assembly. We handle repairs, re-basing, efflorescence remediation, wall rebuilding, and full new installations on residential properties across Garland. We don’t stock OEM or genuine Belgard parts, and we aren’t a Belgard dealer. We source quality parts that fit the system for the job at hand.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Belgard is one of many brands we work with. The same depth applies to KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler, Moen, Grohe, Toto, Delta, American Standard, Blanco, and Sterling plumbing fixtures. One contractor, every project, from driveway to roofline. It’s part of a 50+ brand library spanning the seven service lines we handle.
FAQs – Belgard Construction Service in Garland
No. We are an independent Belgard service provider. We are not authorized, sponsored, or warranty-backed by Belgard, and we are not a Belgard dealer. We specify and install their products because we know the systems well – not because the manufacturer endorses us. Call (888) 405-7616 for a free estimate and we’ll be clear about exactly what our work does and does not cover.
Yes. We match OEM pavers, wall units, caps, and polymeric sand to the existing run where color lots allow, and we use quality geotextile, compacted crushed stone, edge restraint, and drainage fittings for the base assembly. We don’t stock or claim to carry genuine Belgard parts; we source what fits the job. The written estimate spells out exactly which materials are going in. Call (888) 405-7616 to walk through the spec.
That white powder is efflorescence – mineral salt drawn to the surface by moisture moving through the base and joints – and it does not mean the patio is ruined. The surface is usually sound. The cause is trapped moisture from bad slope, a base that holds water, or joint sand that failed. The fix is to correct the drainage and clean the surface with the right acidic wash, then re-joint. Call (888) 405-7616 for a free assessment – estimates cost nothing.
Yes, and it’s done often in Garland, but only with the right assembly. That means excavating deep enough, laying geotextile separation over the expansive clay, building a properly compacted crushed-stone base, edge-restraining the perimeter, and setting joints with polymeric sand. Skip any of those steps and the clay’s wet-dry movement will show up in a season or two as heave, raveling, and washout. The base spec is what you should judge a quote by. Call (888) 405-7616 to get one in writing.
Often closely, but not always exactly. Paver color varies between production lots, so a fresh unit from a different dye lot can read slightly different against a field that’s weathered for years. We plan the repair so any variance lands at an edge or natural break rather than mid-field, and we’re upfront in the estimate about matching limits before you commit. Call (888) 405-7616 and we’ll tell you what to expect for your specific field.
Look at how far it has moved. Slight settling or a few loose caps is usually a repair – re-set the top course, correct the drainage behind it, and add geogrid where it’s missing. Bulging, leaning, or block creep that’s progressed across a run usually means the wall lost its structural support and needs rebuilding with proper batter and grid. Water discharged behind the wall speeds that up, so fixing the downspouts is part of the job either way. Call (888) 405-7616 for a free evaluation and a written, line-item scope.
Yes, polymeric sand is right for a Belgard driveway, provided it’s applied dry and activated correctly. The failures happen when it’s installed wet or over a damp surface – it never locks, and hard rain washes it out of the joints. For a driveway taking vehicle weight and runoff, correct installation matters as much as the product. The written estimate sets the final price. Call (888) 405-7616 to schedule a free estimate.
How much does Belgard construction cost in Garland?
Typical estimated ranges for Belgard work in Garland are below. These are estimates only – the written estimate sets the final price, and the base and drainage scope is what drives the number more than the paver pattern.
| Service | Typical Estimated Range |
|---|---|
| Paver Patio Installation | $3500 – $11000 |
| Paver Driveway Installation | $7000 – $18000 |
| Driveway Replacement | $5000 – $14000 |
| Driveway Sealing | $250 – $700 |
A thin-base quote and a correct-base quote can land far apart on the same patio, because one of them is going to heave within a couple of Garland wet-dry cycles and the other isn’t. We put every line on paper so you can see exactly where the difference comes from. Call (888) 405-7616 – estimates are free.
Book Your Belgard Service in Garland, TX
If you own a Belgard patio, driveway, or wall system in Garland, or you’re planning a new install and want the base done right the first time, call us. Our technicians have up to 10 years of experience, every job gets a free written line-item estimate, and the estimate sets the price. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.