Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru door service and installation in Garland, and we do it as a door-and-window specialist with no manufacturer program steering the outcome. What makes our Therma-Tru work different is that we diagnose first: we test the frame, sill and slab core before anyone recommends a replacement. Construction Garland is a separate company from Therma-Tru and is not affiliated with or authorized by the manufacturer.
Our technicians have up to 10 years of experience on entry and patio door systems, so we can tell the difference between a door that needs a new sweep and one that needs a new slab and frame. If your Therma-Tru door is rattling, sticking, or letting daylight through in Garland, call (888) 405-7616. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Trust Construction Garland for Your Therma-Tru Construction?
Therma-Tru builds entry and patio doors in fiberglass, steel and composite materials, and each of those materials fails in its own way. A technician who works on them regularly learns those failure patterns: a fiberglass slab that has chalked at the top coat, a composite frame that has taken on water, hardware that has drifted out of alignment over a few North Texas summers. Our technicians have up to 10 years of experience with that kind of reading.
We source parts that fit Therma-Tru systems correctly and that hold up to Garland weather, and we don’t claim to stock or carry genuine factory inventory. If a part isn’t right for your door’s era or frame type, we say so. We’re also careful about how the work is done, so a repair doesn’t create a void in your door system’s coverage: we don’t drill, cut or modify hinges and frames in ways that would risk that, and we always explain what we’re doing and why before we touch anything.
And because you’re a Garland homeowner with a real house to protect, we tell you when a repair is the honest answer and when it isn’t. A door that’s out of square will keep sticking no matter how many times it’s adjusted. We’ll show you that before quoting a replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Garland
Most of the Therma-Tru calls we get in Garland fall into a handful of patterns. Knowing which pattern you’re seeing helps you ask better questions before you call anyone.
- Sun-baked, chalky or faded factory finishes. Fiber-Classic and Smooth-Star door slabs with a factory-applied topcoat break down faster on west- and south-facing walls. Garland summers are long and hot, and a slab that catches direct afternoon sun usually needs refinishing before it needs replacing.
- Failed perimeter weatherstripping and door sweeps. Weatherstripping flattens, sweeps wear, and the next thing you notice is daylight at the strike side and dust around the threshold. That gap lets in North Texas heat and dust, and it works against your cooling bill. A new weatherstrip kit and sweep usually close it.
- Swollen, rotted or delaminated wood at the door bottom and side jambs. Splash from hose-end downspouts, irrigation overspray and doors with little overhang protection wick moisture into the jamb bottoms. Left alone, that moisture softens the frame and can travel up the stile.
- Sticking or misaligned slabs after seasonal expansion. Hinges pulled loose, strike plates out of alignment, patio-door hardware that no longer latches cleanly. In Garland’s blackland clay, slab movement is a real driver; doors can work fine in one season and bind in the next.
- Roof or wall moisture leaking above the door head. Sometimes the problem isn’t the door at all. If you see water staining on the header trim, peeling paint above the door, or a door that has warped only on one side, the water is likely coming from above and the entry is just where it shows up. That’s where Therma-Tru door work meets roof repair, and we can look at both.
Therma-Tru Parts & Our Repair-vs-Replace Approach
A Therma-Tru Classic-Craft American Style, Benchmark or entry system with Tru-Defense composite frame can survive a lot of Texas weather if the frame is sound. So the first question is never “do we replace the door?” It’s “what’s the actual condition of the frame, sill and slab core?”
When those pieces are structurally sound, we source OEM Therma-Tru replacement slabs, Tru-Defense frames, sills, weatherstrip kits and hardware that fit properly. If a specific OEM part is discontinued or back-ordered, we’ll use quality aftermarket hardware that fits the door correctly and tell you clearly what you’re getting. What we don’t do is claim to stock or carry genuine Therma-Tru parts, because we don’t.
If the frame, sill or slab core is rotted through, patching it is the expensive path in the long run. Repeated fixes on a failing frame add up faster than one honest replacement. We’ll tell you which side of that line your door is on and let you decide. Call (888) 405-7616 for a free estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnose the door system, not just the visible symptom. We check the slab, hinges, strike plate, latch, frame, sill and weatherstripping. We also look at the header and siding above the door to rule out moisture coming from the roof or wall.
- 2
Repair or replace with the right parts. A sound frame gets a refinish, re-hang, new weatherstrip, sweep and hinges. A slab with a compromised core gets a replacement slab in the existing frame if possible, or a full door-system replacement if the jamb and sill have failed.
- 3
Test the finished door in both directions. We open and close it cold, check the latch and deadbolt alignment, verify the weatherstrip seals at the corners, and confirm the sweep contacts the threshold.
- 4
Leave you with a warranty on the work and clear care notes. We tell you what to watch for over the next season and what maintenance keeps the finish and seals alive in Garland heat.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Garland
We work on the Therma-Tru entry and patio door systems Garland owners actually have: Fiber-Classic entry doors, Smooth-Star fiberglass entry and patio doors, Classic-Craft American Style collection doors, and Benchmark entry systems with Tru-Defense composite frames. That includes slab replacement, weatherstrip and sweep kits, hinge and hardware repair, refinishing fiberglass surfaces, and full door-system replacement when the frame is gone. If your unit is a Therma-Tru, we can work on it. And if the door is the only visible problem but the roof or wall above it is the real source of moisture, we have that covered too – Window Replacement, Roof Repair and Full Bathroom Remodeling are all part of what we do. Call (888) 405-7616.
We Also Service These Brands
Therma-Tru doors don’t live in a vacuum. If the same Garland house needs new cabinetry, countertops or bath fixtures, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops, and Kohler bathroom fixture lines. One contractor, every project, means your door work and your kitchen or bath remodel can be coordinated by the same team.
FAQs – Therma-Tru Construction Service in Garland
Is Construction Garland authorized by Therma-Tru? No. We are an independent service provider, not a Therma-Tru dealer or authorized repair center. We install, repair and service Therma-Tru doors with quality parts that fit, and we’re not bound by any manufacturer program.
Do you use quality parts that fit Therma-Tru equipment? Yes. We source OEM Therma-Tru components where they’re available and quality aftermarket hardware when OEM parts are discontinued or back-ordered. You’ll know exactly what’s going on your door before we install it.
How long does Therma-Tru service take? Most weatherstrip, sweep, hinge and hardware repairs are done the same day. Slab refinishing takes longer because the finish has to cure. A full door-system replacement depends on the frame condition and part availability. We answer 24/7 at (888) 405-7616, with fast dispatch from 7am to 7pm.
What kinds of Therma-Tru products do you cover? Fiber-Classic entry doors, Smooth-Star fiberglass entry and patio doors, Classic-Craft American Style collection doors, and Benchmark entry systems with Tru-Defense composite frames. If you’re unsure which series you have, call and we’ll help identify it.
Will service void my Therma-Tru warranty? Not if the work is done correctly. Factory warranty terms are set by the manufacturer, not by us, so we keep our repairs to the parts and practices the door was designed for. We’ll also tell you if a repair might affect coverage before we start.
How much does Therma-Tru construction cost in Garland? Typical estimated ranges for the related work we do are in the table below. The written estimate sets the final price, and estimates are free. Call (888) 405-7616 for an exact quote.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
| Bathroom Remodel | $9,000 – $28,000 |
Can a faded Fiber-Classic or Smooth-Star door slab be refinished instead of replaced? Often, yes. If the chalky finish is cosmetic and the slab core is sound, refinishing and re-hanging with new weatherstrip, sweep and hinges usually gets you a clean, sealed door. If the core has taken on water, replacement is the honest answer.
Why does my Therma-Tru entry door stick in summer and show daylight in winter? The door and frame expand and contract at different rates with Texas heat and humidity, and a slab that was aligned in one season can bind in another. That seasonal movement is normal; a strike plate or hinge adjustment usually solves it. Persistent daylight at the strike side through the seasons points to weatherstrip or frame issues instead.
Does a Tru-Defense composite frame rot like wood? No. A Tru-Defense frame won’t rot the way wood does, because the composite doesn’t absorb water. But the frame can still take water damage at seams if the door’s installation has let moisture behind it, and swollen or cracked frame joints still need attention.
Can a Therma-Tru patio door be repaired without replacing the whole unit? Usually yes. If the rolling panel, tracks, hardware and weatherstripping are the problem, they can be repaired or replaced individually. If the frame itself is warped or water-damaged, a full replacement is the cleaner fix.
How do I know whether my Therma-Tru door problem is a door issue or a roof and wall moisture issue? Look for water staining on the header trim, peeling paint above the door, or a door that’s warped on only one side. Moisture above the door head usually means the source is the roof or the wall assembly, and fixing the door without fixing that will just bring the problem back. Call (888) 405-7616 and we’ll look at both.
Book Your Therma-Tru Service in Garland, TX
If your Therma-Tru door is sticking, leaking daylight, or showing a failing finish, we can diagnose it and tell you honestly whether it needs a repair or replacement. Call (888) 405-7616 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.