Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Garland, TX – templating, installing, repairing and re-sealing Mr-Glass shower enclosures and glass systems in the older homes that make up most of this city’s housing stock. What sets our Mr-Glass work apart is that we treat a glass enclosure as a fitted building component, not a catalog add-on: we check plumb, blocking and curb condition before a single panel is hung, because in Garland those are usually the real reason a door drags or a curb leaks. Construction Garland is an independent service provider and is not affiliated with, authorized by or sponsored by Mr-Glass. We work with the brand because we know it well, not because anyone gave us permission to say so.
Garland is an inner-ring Dallas suburb, and most of its housing went up around the former Ordinance Plant and the Lake Ray Hubbard boom years. That means the work here is renovation and repair of 1950s through 1970s single-family homes, not greenfield building. Bathrooms in those homes are small, walls are often out of square, and slabs have been moving for decades. A glass shower enclosure has to be templated to that reality. Call (888) 405-7616 and we’ll talk through your Mr-Glass project. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Garland for Your Mr-Glass Construction?
Our technicians have up to 10 years of experience, and a good share of that time has been spent on glass – measuring openings, setting anchors, hanging tempered panels square and sealing them so they stay dry. Mr-Glass builds framed, semi-frameless and frameless shower systems with their own hardware and their own tolerances. Someone who works with those systems regularly knows where the load sits, how much play a pivot needs, and why a bypass door binds after a year instead of after a month.
We use quality parts that fit Mr-Glass equipment. Where a factory-correct roller, guide, hinge or seal is available, that’s usually the cleanest fit, and we say so. When a specific part is discontinued, quality aftermarket hardware is a reasonable path, and we’ll tell you that plainly too. We’re not a Mr-Glass dealer, we don’t stock or order genuine Mr-Glass parts as a matter of course, and we’re not factory-trained or certified by Mr-Glass. What we are is an independent contractor that has learned the product.
Warranty-safe service matters here. Cutting into a frame, drilling a panel or resealing with the wrong product can create problems a manufacturer will point to later. We work in a way that keeps your enclosure’s structure and finish intact, and we document what we did. That’s the difference between a repair and a complication.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Garland
Most Mr-Glass service calls in Garland come down to one of five things. Here’s what each one actually means.
- Worn bottom guides and rollers on bypass doors. Bypass units carry the panel’s weight on rollers and keep it centered with a bottom guide. Both wear. A flattened roller makes the door drag, and a chewed guide lets the panel jump the track or bind halfway through a slide. Replacing those two components is usually the whole fix, provided the track itself isn’t bent.
- Failed silicone and weep-seal at the curb and wall jambs. This is the leak that shows up as soft grout, a stained ceiling below, or water on the bathroom floor. The seal at the curb and jambs is what keeps water inside the enclosure, and in a Garland bathroom that sees daily use it degrades. Re-caulking with a silicone rated for wet areas is the routine answer, but only after we confirm the weep holes aren’t blocked and water isn’t already sitting behind the tile.
- Hinge or pivot sag on frameless doors. A frameless door hangs entirely on its hinges or pivot, and those anchors transfer the load into wall framing or blocking. When that blocking is out of plumb – common in homes built before 1980 – the anchor pulls, the door sags, and it starts dragging on the curb or the opposite panel. This is a structural fix as much as a hardware one.
- Tempered glass edge chips and seal strip shrinkage. Tempered glass can’t be cut or repaired once it’s made, so a chip near a hinge or a panel edge is a real limit. Seal strips around doors and panels shrink with age and heat, which opens gaps at the exact spot where water leaves the shower. Strip replacement is cheap. A chipped panel is not, and we won’t pretend otherwise.
- Out-of-square openings masking as hardware failure. Sometimes the hardware is fine and the opening isn’t. In the older cottages near downtown Garland and along the Duck Creek corridor, we check the walls and curb for plumb before we blame a hinge. Hanging new glass into an out-of-square opening just transfers the problem to the new parts.
Straightforward setup, this: a frameless or semi-frameless Mr-Glass shower door that sags, drags or leaks usually traces to a hinge or pivot anchor that has pulled loose from out-of-plumb blocking, or to worn rollers and shrunk seal strips on a bypass unit. A qualified local pro typically checks plumb and the wall and curb anchors, replaces the hinges, rollers, guides and seals, re-hangs the glass square, and re-seals the jambs and curb with silicone rated for wet areas so water stays inside the enclosure.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass enclosures, factory-correct rollers, guides, hinges, seals and handle sets are usually the cleanest fit. We’ll pursue those first when they’re available, and we’ll tell you if they aren’t. Quality aftermarket hardware is a fair option when a specific original part has been discontinued, and a well-chosen aftermarket hinge or roller will do its job for years. We don’t stock or carry genuine Mr-Glass parts and we’re not a dealer, so we’re not going to claim otherwise.
How we decide repair versus replace comes down to three conditions: the glass, the framing and the opening. If the panels are sound and the framing is intact, new hardware and a fresh re-seal will usually bring an enclosure back to good working order. If panels are chipped at the edges, hinges have torn out of the framing, or the opening is genuinely out of square, replacement is the honest recommendation. Hanging expensive hardware on compromised glass wastes your money.
If your Mr-Glass door is dragging or your curb is leaking, call (888) 405-7616. We’ll look at it and tell you which side of that line you’re on. Estimates are free, and the written estimate sets the final price.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check the opening for plumb, inspect the curb and jambs, test the rollers, guides and hinges, and look for chips at the glass edges. We also check the wall behind the enclosure for signs water has been getting past the seal. In Garland’s older bathrooms this step often finds a wall issue the homeowner didn’t know about.
- 2
Repair or installation. For a repair, we replace the failing hardware, re-hang panels square and re-seal. For a new enclosure, we template the actual opening rather than trusting the tape measure – framed, semi-frameless and frameless systems all get installed to their own tolerances.
- 3
Test. We cycle the door or panels through a full range of motion, confirm the bottom guide holds, run water to check the curb and jamb seals, and verify nothing weeps where it shouldn’t.
- 4
Warranty and handoff. You get a clear record of what was replaced and what was sealed, plus a workmanship warranty. If a manufacturer warranty question ever comes up, that record is what you want in hand.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Garland
We work with the Mr-Glass product types you’d actually find in a Garland bathroom. That includes frameless sliding shower door systems, semi-frameless pivot shower doors, framed bypass doors for tub and shower combinations, and custom frameless fixed panels and return panels. We install them, repair them, replace hardware on them, and re-seal them.
The work runs alongside our bathroom remodeling scope, which matters more than it sounds. Frameless Glass Shower Enclosures, Walk-In Shower Installation, and Tile & Fixtures are all part of what we handle, so if the tile surround or the shower pan needs attention, it’s one project instead of three contractors trying to sequence around each other. If you’ve already got a Mr-Glass enclosure that’s failing, we repair it as a standalone job too.
We Also Service These Brands
Mr-Glass is one brand in a much larger library. We also work with KraftMaid cabinetry, Cambria, Silestone and Kohler, among the more than 50 manufacturer brands behind our kitchen, bath, roofing, window, door, fencing, hardscape and ADU work. That breadth is deliberate. When a Mr-Glass enclosure isn’t the right answer for your opening, we can point to a compatible alternative without steering you toward a factory replacement out of habit.
FAQs – Mr-Glass Construction Service in Garland
No. We are an independent service provider and are not affiliated with, authorized by or sponsored by Mr-Glass. We repair, install and service Mr-Glass enclosures using quality parts that fit them, and we recommend what we think is right for your bathroom rather than what a factory program dictates.
Yes. We prioritize factory-correct rollers, guides, hinges, seals and handle sets when they’re available, and quality aftermarket hardware when a specific original part has been discontinued. We don’t claim to stock or carry genuine Mr-Glass parts, and we won’t tell you a part is original if it isn’t.
A hardware and re-seal repair on an existing Mr-Glass enclosure is usually a single visit. A new enclosure installation takes longer because it has to be templated to your opening, and glass has to be made to that template. The written estimate you get up front spells out the sequence and what affects the timeline.
Frameless sliding shower door systems, semi-frameless pivot shower doors, framed bypass doors for tub and shower combinations, and custom frameless fixed and return panels. Repair, replacement of hardware and re-sealing are all in scope, and we handle them alongside tile and fixture work when the job calls for it.
Not if it’s done correctly, which is why we work warranty-safe: no cutting into factory framing, no drilling panels, and wet-area silicone on the curb and jambs. We record what we replaced and sealed so there’s a clear account if a warranty question ever arises. Ask us directly about your specific situation.
Most Mr-Glass enclosure work in Garland falls into the ranges below. These are typical estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (888) 405-7616 for an exact quote. Estimates are free.
Book Your Mr-Glass Service in Garland, TX
Whether your Mr-Glass enclosure needs new rollers, a hinge reset or a full replacement, we’ll look at the opening and give you a straight answer with a written, line-item estimate. We’re licensed and insured, the estimate is free, and the price is fixed by the written quote. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.