Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose CWS Construction
CWS refers to CWS (Cabinets & Woodworking Specialists) semi-custom cabinetry – the all-plywood, dealer-channel kitchen and bath lines that show up in a lot of older Garland homes. We provide independent CWS installation, refacing, and repair service in Garland, Texas. Our technicians have up to 10 years of experience working with semi-custom cabinet boxes, door fronts, fillers, and panels, and they know how this product ages in North Texas conditions. One important point up front: Construction Garland is not affiliated with, authorized by, or a dealer for CWS. We’re an independent contractor that knows the product line well. Call (888) 405-7616 to schedule a free estimate.
Why Trust Construction Garland for Your CWS Construction?
We work with cabinet lines that live inside a builder/dealer channel, which means we understand how they’re specified: measuring for fillers and panels, squaring boxes during install, and matching door and drawer fronts so the finished run still looks like it came from one factory. Our technicians measure tolerances tighter than what a box-store package or production framing crew typically delivers.
We also know that most “CWS cabinet failure” complaints aren’t product defects. They’re install defects – screws that grabbed drywall instead of studs, hinge plates installed out of square, or a sink opening with no moisture protection. That distinction matters because it tells you whether to fight with the cabinet or just re-hang it correctly. When we service CWS cabinetry we use quality parts that fit it, including matching fillers and panels, proper cabinet screws anchored to studs, and replacement hinges aligned to the original drill pattern. That keeps the factory look intact and avoids punching new holes that can complicate a warranty claim.
We’re also candid about what we are. We’re not factory-authorized and we don’t claim to be. We’re an independent team that has handled a lot of CWS-adjacent work in Garland and can walk you through whether your issue is covered, fixable, or past the point of saving.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Garland
These are the failures we see most often with semi-custom cabinet runs in Garland-area homes. Each one has a different cause and a different fix, so before you assume the cabinets need replacing, it’s worth knowing which problem you actually have.
- Sagging or cracked upper cabinets. This almost always traces back to installation, not manufacturing. If the original installer used short screws or drove them into drywall rather than wall studs, the cabinet’s weight slowly pulls the anchors loose. Add Garland’s summer heat and the seasonal humidity swings and the strain compounds. The fix is a proper re-hang to studs with cabinet-rated screws.
- Doors and drawer faces that won’t stay aligned. A door with a widening gap at the top rail after a heating season gets blamed on the cabinet, but it’s usually hinge plate fatigue or a striker that’s gone out of alignment. This is repairable without replacing the box or the door. The trade-off is that the hinge has to match the existing drill pattern or you’re punching new holes.
- Nailer and frame delamination at the sink or dishwasher opening. This is where moisture does its worst. A slow plumbing drip behind the sink, or steam from a dishwasher venting into the cabinet interior, swells the plywood nailer over time. Once the substrate has swelled and cracked, it doesn’t shrink back. A splash guard and a leak fix behind the sink prevent the same failure from repeating.
- Prefab and multi-piece layout seams opening at the wall. Semi-custom layouts that arrive in pieces (common in starter-home and production builds) have seams between boxes. In a Garland kitchen, those seams move with the summer-to-winter humidity swing. A visible gap along the wall at a box seam is a seasonal movement symptom, not a cabinet that’s coming apart.
- Cabinet boxes that were never squared on install. When the toe-kick line runs out of level or the doors throw light at the corner, the whole run is fighting itself. Fixing this means re-shimming and re-anchoring at the frame. It’s harder than it looks, and doing it half-way usually makes door alignment worse.
CWS Parts & Our Repair-vs-Replace Approach
We don’t stock or carry original CWS parts and we’re not a CWS dealer. What we do is use quality parts that fit your cabinets correctly – door fronts, fillers, and hinges that match the line’s factory proportions and preserve the look. For countertops and shower glass we spec name-brand quartz slabs and tempered glass, not generic imports.
Repair vs replace comes down to three questions. Is the box sound? If yes, re-hanging, re-hinging, or refacing almost always beats a full gut. Is the whole run failing? If you’re looking at a 1990s prefab layout that’s gone soft at every opening, honest pros price out refacing with quality aftermarket fronts against full replacement – and tell you when replacement wins. And is the failure install-related? If it is, the fix is cheaper than you think and worth doing before you spend on new cabinetry.
Call (888) 405-7616 and we’ll walk through your cabinets with you before you commit to a remodel. Estimates are free.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We check the boxes for square, pull the doors and test hinge plates, inspect the sink and dishwasher openings for moisture, and look at how the cabinets were anchored to the wall. That tells us whether we’re dealing with an install problem, a wear problem, or actual structural failure.
- 2
Repair or install. If it’s a re-hang, we anchor to studs with cabinet screws, square the run, then re-align the faces. If it’s a fresh CWS install, we measure for fillers and panels, set the boxes level, and match the door fronts so the run reads as one factory piece.
- 3
Test. Doors and drawers open and close without rubbing. Gaps run even. The counter and splash line are true. We make you open every door before we call it done.
- 4
Warranty and handoff. We tell you what we did, what to watch for, and where the moisture boundaries are so the same failure doesn’t come back. That’s the part most installs skip, and it’s the part that saves you a call in two years.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Garland
We work with CWS semi-custom all-plywood kitchen cabinet lines, including raised-panel and shaker door styles. We also service CWS bath vanity cabinet lines, matching toe-kick and filler packages, prefab and framing-series layouts common in older starter homes and production builds, and stock cabinet runs sold through regional dealers and design showrooms.
If your existing run is CWS, we can typically diagnose it without pulling it. If you’re planning a new install, we can specify it correctly from the outset. We also take on refacing and full-dooring, and handle the splash and float work around the cabinet line. Whatever the CWS product, the focus is the same: measure it right, install it tight, and match the factory look.
We Also Service These Brands
Construction Garland isn’t dependent on any single cabinet line. Alongside CWS work we install and service KraftMaid cabinetry, Cambria, Silestone, and Kohler fixtures across Garland kitchens and baths. That means when you’re comparing material options across brands, you’re talking to a team that knows them individually rather than pushing one catalog. Call (888) 405-7616 to talk through which line fits your project.
FAQs – CWS Construction Service in Garland
No. Construction Garland is an independent contractor and is not authorized, sponsored, or endorsed by CWS. We work with CWS cabinetry because we know the product line and how it ages in North Texas homes, but we don’t speak for the manufacturer and we don’t represent ourselves as a CWS dealer.
Yes. We use parts that fit CWS cabinetry correctly, including matching door fronts, fillers, and hinges close to the factory spec. We don’t claim to stock or carry original CWS-manufactured parts, but our material choices preserve the look and function of the line.
Most CWS cabinet repairs, including re-hangs, hinge replacement, and door alignment, are done in a single visit. Refacing and full dooring typically take a few days depending on how many boxes and fronts need matching. A full CWS cabinet install in a Garland kitchen usually runs one to two weeks depending on layout and counter/splash coordination. Call (888) 405-7616 for a realistic timeline on your kitchen.
We cover CWS semi-custom kitchen cabinet lines, bath vanity cabinet lines, prefab and framing-series layouts, and stock cabinet runs sold through regional dealers and showrooms. Refacing, re-hinging, splash guards, and full-dooring are all in scope.
Independent service does not automatically void a CWS warranty, but manufacturer warranty terms can vary by product and by how the failure occurred. We can walk you through what we’re doing and how it relates to the original warranty, so you know what to expect if a defect claim ever comes up. Call (888) 405-7616 and we’ll talk through your situation.
Typical estimated ranges for CWS cabinet work in Garland depend on scope. Here’s a practical pricing table based on our standard estimates. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
Call (888) 405-7616 for an exact quote – estimates are free.
Book Your CWS Service in Garland, TX
If you’re staring at a cabinet door that won’t stay closed or a splash of water damage under the sink, don’t guess at the cause. Let us diagnose it. Call (888) 405-7616 for a free estimate on CWS cabinet work in Garland. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Written line-item quotes, no change orders.
Written by the team at Construction Garland.