Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garland Homeowners Choose GAF Construction
Construction Garland provides independent GAF construction service in Garland, TX: roof repair, full roof replacement, and storm damage work on GAF roofing systems, including Timberline HDZ, UHDZ, Liberty low-slope, and EverGuard TPO assemblies. What makes our GAF work different is the layer-by-layer approach – we treat underlayment, flashing, and ventilation as one system instead of patching the surface and walking away. We’re an independent contractor, not affiliated with or authorized by GAF, and we tell you that up front because it matters when warranty questions come up.
Garland is an inner-ring Dallas suburb, and that shapes nearly every roof we look at. Most of the housing here went up between the late 1940s and the 1970s, on and around the former Ordinance Plant and through the Lake Ray Hubbard boom years. That means most of our work is renovation and repair of aging single-family homes, not new build on the edge of the metro like you’d see in McKinney or Frisco. Older roofs, older decking, older ventilation details. The GAF systems on these homes have usually been through several hail seasons and a lot of North Texas summer heat by the time we see them.
Call (888) 405-7616 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Garland for Your GAF Construction?
Our technicians have up to 10 years of experience, and a good share of that has been spent on GAF steep-slope and low-slope systems. They know how Timberline HDZ shingles are supposed to lay down, how the Dura Grip seal strip behaves in Garland heat, and where a Liberty self-adhered membrane typically goes wrong when it’s applied over a deck that wasn’t ready for it. That familiarity is the whole job.
We use quality parts that fit GAF equipment: GAF-branded underlayments, ridge caps, and starter strips so the system stays compatible, paired with quality aftermarket flashing and ventilation components when they’re specified correctly. We don’t claim to stock genuine GAF parts, and we won’t tell you a part is factory-original when it isn’t. What we can tell you is whether the repair you’re asking for keeps your warranty intact or quietly compromises it.
Warranty-safe work comes down to details most homeowners never see. Nail placement in the nailing zone. Proper starter course. Ridge cap installed to spec. Ventilation balanced between intake and exhaust. Skip any of it and the shingle above it fails early. We write the scope so those details are named, and we pull the permits the work requires so inspections pass. The written estimate sets the final price, with no change orders once the job starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in Garland
These are the GAF failure modes we run into most in Garland. Knowing which one you’re looking at is usually the difference between a repair and a replacement.
- Premature sealant failure on Timberline HDZ shingles. The Dura Grip seal strip is designed to bond tabs together once the roof reaches temperature. In Garland’s repeated summer heat cycles the strip can fail to bond cleanly, or bond and then release, which leaves tabs loose and vulnerable to wind lift. Homeowners often notice it as shingles flapping along an edge after a gusty spring storm, long before any hail arrives.
- Granule loss and blistering on Timberline UHDZ shingles. This is usually ventilation, not the shingle. Older Garland homes frequently have undersized soffit vents, so hot attic air has nowhere to exhaust and cooks the underside of the deck and shingle. The result shows up as granules in the gutters and blisters across the field. If the mat is exposed, the shingle is done.
- Flashing failures on GAF Liberty low-slope sections. Liberty is a self-adhered SBS membrane, and it needs a clean, dry deck to bond. Applied over damp or dusty decking, it wrinkles, and those wrinkles become water paths at chimneys and valleys. We see this on porch roofs and additions across the Duck Creek corridor and near downtown Garland, where small low-slope tie-ins are common.
- Fastener back-out and ridge cap blow-off. Incorrect nail placement or an overdriven pneumatic nail gun leaves fasteners that don’t hold. After a hail event, the ridge cap is often the first thing to go, and high nails are usually the reason.
- Storm-driven flashing damage at penetrations. Spring hail and severe thunderstorms are a recurring seasonal demand here, and the damage usually concentrates where the roof meets a chimney, a vent, or a valley. The shingle field survives; the flashing detail doesn’t.
GAF Parts & Our Repair-vs-Replace Approach
We use GAF-branded underlayments, ridge caps, and starter strips to keep the system compatible, and quality aftermarket flashing and ventilation components when they’re the right specification for the detail. We don’t claim to stock genuine GAF parts or to be a GAF dealer – we’re an independent shop that specifies parts that fit your roof correctly.
Repair versus replace comes down to three checks. Is the deck sound and dry? Is the underlayment intact? Is the damage isolated? If all three are yes, we repair isolated wind or hail damage and match the existing material. Full replacement is warranted when granule loss has exposed the fiberglass mat, or when flashing details have failed across multiple penetrations – at that point you’re not fixing a problem, you’re chasing one.
A typical job here goes like this: a homeowner notices missing shingle tabs along a ridge after a spring hailstorm and calls an independent GAF specialist, who inspects the field shingles for granule loss and checks whether the original install used GAF starter strips and ridge cap. If the deck is dry and the damage is isolated, the pro replaces the ridge cap and any lifted Timberline HDZ shingles with matching material and re-seals with GAF-approved sealant. If granule loss is widespread or flashing has failed, the scope shifts to a partial or full replacement with a GAF system.
Not sure which side of that line your roof is on? Call (888) 405-7616 – estimates are free.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We get on the roof and inspect the field shingles for granule loss, check the Dura Grip seal strip on Timberline HDZ, probe flashing at every penetration, and look at attic ventilation from the inside. On a Liberty low-slope section we check for wrinkles and lift at the seams. You get photos and a written line-item scope.
- 2
Repair or install. For repairs, we match material and re-seal with GAF-approved sealant, replacing ridge cap and starter strips as needed. For a replacement, we install a full GAF system – underlayment, starter course, field shingles, ridge cap – with nail placement verified, not assumed.
- 3
Test. We water-test repaired flashing and valleys, confirm ridge and edge fastening, and check that the attic is exhausting properly once the new roof is on. A roof that’s watertight but under-ventilated will fail early, so we test both.
- 4
Warranty and handoff. We walk you through what the installation covers, which details affect your GAF warranty, and what to watch for each season. Permits pulled and inspections passed before we close the job.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in Garland
We repair, install, and service GAF roofing systems across Garland, including the Timberline HDZ line (including UHDZ and AS II shingles), the Timberline UHDZ Cool Series, GAF Liberty SBS Self-Adhered Roofing for low-slope sections, and GAF EverGuard TPO Single-Ply. Steep-slope shingle roofs make up most of the residential work here, with Liberty and EverGuard turning up on porch roofs, additions, and small flat tie-ins. We don’t publish a stocked inventory list – every job is specified to the roof in front of us. If you’re not sure which system you have, we’ll identify it during the estimate.
We Also Service These Brands
GAF is one of six roofing manufacturers we work with, alongside CertainTeed, Owens Corning, IKO, Atlas, and Tamko. Beyond roofing, Construction Garland handles kitchen and bath work with lines like KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures – one contractor from driveway to roofline. Different brand, same accountability.
FAQs – GAF Construction Service in Garland
No. Construction Garland is an independent GAF service provider and is not affiliated with, authorized by, or a dealer for GAF. We install and repair GAF systems using quality parts that fit them, and we tell you plainly when a warranty question is one only the manufacturer can answer. Call (888) 405-7616 for a free estimate.
Yes. We specify GAF-branded underlayments, ridge caps, and starter strips to keep the roof system compatible, and we use quality aftermarket flashing and ventilation components when they’re correctly specified for the detail. We don’t claim to stock genuine GAF parts in Garland. What we guarantee is that the parts we install fit your roof properly and the written estimate names them.
An isolated GAF roof repair in Garland is typically a single-day job. A full GAF roof replacement generally runs several days depending on roof size, pitch, and how much decking needs to be replaced once it’s opened up. Storm damage work can take longer if material has to be matched or a permit inspection is scheduled. Call (888) 405-7616 and we’ll give you a realistic timeline with your written estimate – estimates are free.
We cover GAF steep-slope shingle systems including Timberline HDZ and UHDZ, the Timberline UHDZ Cool Series, GAF Liberty SBS Self-Adhered Roofing for low-slope areas, and GAF EverGuard TPO single-ply. That spans most residential roofing in Garland, from full replacements to flashing repairs on a small low-slope section. Call (888) 405-7616 to confirm your specific system.
Correctly performed repair and installation work shouldn’t void your GAF warranty, but incorrect detailing can – high nails, missing starter course, or flashing installed over a damp deck are the usual culprits. We work warranty-safe on purpose: proper underlayment, specified flashing, balanced ventilation. We can’t speak for GAF’s determinations, but we can make sure the installation doesn’t give them a reason. Call (888) 405-7616 to talk through your roof.
Typical estimated ranges in Garland are $400 – $1,800 for isolated GAF roof repair, $8,000 – $20,000 for a GAF roof replacement, and $15,000 – $40,000 for GAF metal roofing installation. The written estimate sets the final price, and we hold to it with no change orders. Call (888) 405-7616 for an exact quote – estimates are free.
| Service | Typical Estimated Range |
|---|---|
| GAF roof repair (isolated shingle or flashing) | $400 – $1,800 |
| GAF roof replacement | $8,000 – $20,000 |
| GAF metal roofing installation | $15,000 – $40,000 |
It can. GAF’s stronger warranty tiers are typically tied to installation by contractors in their own certification program, and we’re independent, so we don’t qualify for those tiers. What we can do is install the system correctly – proper underlayment, correct nail placement, balanced ventilation – so the coverage you do have isn’t compromised. Ask us directly and we’ll tell you honestly what applying through a certified contractor would and wouldn’t change. Call (888) 405-7616 for a free estimate.
Heat failure shows up as tabs that won’t seal or re-seal along the field, with granules still largely present and no impact marks. Hail leaves circular bruises, granule loss in patches, and often dents in soft metal nearby. In Garland, both happen in the same season, and heat cycling often does the groundwork before hail finishes the job. A roof inspection settles it in minutes – call (888) 405-7616 and estimates are free.
Often, yes. If the wrinkle or seam failure is isolated and the deck underneath is dry, we can cut out the affected section and re-lay Liberty membrane with proper adhesion and a sealed lap. If the membrane was originally applied over damp or dusty decking, the failure tends to run wider and a partial re-cover makes more sense than spot repairs. We’ll tell you which one your roof needs after we look. Call (888) 405-7616 for a free estimate.
At minimum, balanced intake and exhaust – soffit venting sized to match the exhaust capacity, whether that’s ridge vent or another exhaust type – enough to keep the attic from cooking the shingle from underneath. Many older Garland homes were built with undersized soffit vents, so adding intake is often part of the scope. Under-ventilated roofs are a leading cause of the granule loss and blistering we see on Timberline UHDZ. Call (888) 405-7616 and we’ll assess your attic with the roof estimate – free.
It depends on the damage and your policy. Storm damage from hail or wind is commonly covered, while wear and age-related granule loss generally isn’t, and insurers often distinguish the two through their own inspection. We document storm damage thoroughly with photos and a written scope you can hand to your adjuster, and we can work with your insurer on the claim. We don’t speak for your carrier. Call (888) 405-7616 for a free storm damage estimate.
Book Your GAF Service in Garland, TX
Whether it’s a lifted ridge cap on a Timberline HDZ roof or a full GAF system replacement on an aging Garland home, we’ll inspect it, explain what’s actually failing, and put the scope and the price in writing before anything starts. Licensed and insured, permits pulled and inspections passed, workmanship warranty on every job. Call (888) 405-7616 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.