Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Irving
If you’re planning a new fence on an Irving lot, the work usually comes down to access and coordination before it ever comes down to pickets. We handle fence installation across Irving with an eye on the tight side yards, shared drives, and dense permitting that define the city. From the high-rises of Las Colinas to the postwar ranches south of the airport, we know what a job here actually takes. Call (888) 405-7616 and we’ll talk through your property. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Irving Homeowners Call Construction Garland for Fence Installation
Irving is a city of two different fence jobs stacked under one permitting jurisdiction, and that’s the first thing we account for. In Las Colinas and the 75038 and 75039 towers, a fence replacement often means architectural review and HOA sign-off before a single post is set. In the older neighborhoods around 75062, it’s a 1950s ranch where the fence line hugs a neighbor’s driveway and the mature trees push roots through the path. We plan for both.
The local reputation that matters on a fence job is simpler than a marketing line: showing up when we say, respecting the property line, and leaving the site clean. Our technicians have up to 10 years of experience, and every job starts with a free written estimate that lays out the scope line by line. Permit and inspection sign-off are part of the plan, not an afterthought.
Response to Irving is quick because the city sits between our Garland work and the airport corridor. When you call, we schedule an estimate around your address, and if a gate or a shared fence needs attention sooner, we can line up a same-day visit when the schedule allows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Irving
Wood Fence Installation in Irving
Wood is the default on south Irving ranch lots for good reason: it fits the scale of a 1950s brick home and it can be built to run tight along a narrow side yard. Our wood fences are set with posts driven to proper depth and set in concrete, which matters in Irving’s clay. We repair and replace wood sections too, so a leaning run doesn’t mean a full tear-out.

Fence Repair in Irving
Repair is the most common call we get in Irving, and it usually traces back to shallow posts in swelling clay. A fence that heaves and leans within a few seasons was likely set without enough depth for the soil movement. We diagnose the post line first, then repair or reset what’s actually failing rather than quoting a whole new fence.

Fence Gates in Irving
Gates take the most wear of any part of a fence, and on a tight Irving lot a swinging gate has to clear a driveway, an AC unit, or a trash can. We set gate posts deeper and hinge them square so they don’t sag. Driveway gates and pedestrian gates are both in scope.

Aluminum Fence Installation in Irving
Aluminum is a strong pick for Las Colinas and Valley Ranch properties where an HOA wants a clean, uniform look and the fence needs to sit along a shared wall or a zero-lot line. It’s low-maintenance in the North Texas heat and holds its shape through the wet-dry cycle. A typical aluminum fence installation in Irving runs $4,000 – $10,000.
Vinyl and Privacy Fence Installation in Irving
Vinyl privacy fencing shows up on newer Irving subdivisions and on rebuilds where the homeowner wants a solid privacy line without the repainting wood requires. Bufftech and ActiveYards are two of the lines we work with. For the older lots where a neighbor’s second-story window looks straight into the yard, a taller privacy panel gets the job done. A typical vinyl fence installation in Irving runs $3,500 – $9,000.
Trusted Brands We Service in Irving
Fence material choice should follow your style and budget, not what a single supplier happens to stock. We work with Barrette, Jerith, Bufftech, and ActiveYards across wood, vinyl, aluminum, and iron, so you can match a panel to the look of your block. We don’t carry inventory or run trucks full of stock. We quote the material, order it for your job, and schedule the install so it arrives when the crew needs it.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Irving Homes
- Posts set too shallow in expansive clay. North Texas clay swells when it’s wet and shrinks when it dries, and a post that isn’t set deep enough will heave and lean within a few seasons. We set posts to the right depth with concrete so the line stays true.
- No party-wall agreement or property-line verification. On the tight south Irving lots, a fence often sits on or within inches of the property line. Confirm the line and talk to the neighbor before the first post goes in, or you can end up removing a finished section.
- Materials staged in a narrow shared driveway or alley. Older Irving blocks have driveways and alleys that barely fit a car, let alone a pallet of panels. Staging that blocks access can trigger a stop-work order or a citation, so we plan the drop and stage on the street or driveway instead.
- HOA and overlay review missed in Las Colinas. In 75039 and 75038, an HOA fence replacement can require architectural approval before work starts. Skipping that step puts the whole project on hold.
Pricing for Fence Installation in Irving, TX
Fence pricing in Irving is driven by linear footage, material, gate count, and, more than on a suburban lot, access. A fence built along a tight side yard or staged away from a busy street takes more labor than an open back lot, and that shows up in the estimate. Here are the typical ranges for the two most common materials on Irving jobs.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Wood, chain link, iron, and privacy fences are quoted per job. The written estimate sets the final price, and it’s free to get one. Call (888) 405-7616 to schedule your estimate.
We Also Serve Cities Near Irving
Irving sits close to Farmers Branch, University Park, Addison, and Highland Park, and we install fences across those neighboring cities too. If your property is on the edge of Irving or just across the line, we can look at the same estimate visit. Call (888) 405-7616 to confirm coverage for your address.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Irving
Yes, a fence permit is generally required in Irving, and the review path changes depending on where you are. In Las Colinas and the 75039 and 75038 towers, the HOA and architectural review often run on top of the city permit, while the older south Irving ranches usually go through a standard permit review with more attention to property-line location. We pull the permit and confirm the requirements for your address before work starts. Call (888) 405-7616 for an exact scope and quote.
A narrow side yard or shared driveway raises the labor side of the quote because staging, digging, and hauling all take longer in a tight space. Materials have to be staged on the street or driveway without blocking the alley, and posts along a shared line may need hand digging. That access cost is real, and we spell it out in the written estimate rather than burying it. Call (888) 405-7616 to talk through your lot.
For Irving’s swelling clay and hot summers, the post system matters more than the panel material. Wood and vinyl are both common here, but whichever you choose, posts need proper depth and concrete to resist soil movement, and a vinyl or aluminum panel handles the heat without repainting. Our technicians have up to 10 years of experience setting posts for this soil. Call (888) 405-7616 for a recommendation and a free estimate.
Yes, we help with party-wall coordination when a fence sits on or near the line. That starts with confirming the property line, then giving the neighbor notice before the first post goes in. On the tight Irving lots, that conversation prevents disputes and possible removal of a finished section. Call (888) 405-7616 and we’ll walk through the steps for your property.
Irving’s work-hour rules and the density of the older blocks both shape the schedule on a fence job. In a tight neighborhood, noisy work like post digging is best grouped so it doesn’t run into the neighbor’s dinner, and quiet panel and gate work fills the rest of the day. We plan the schedule around the ordinance and the neighbor, not against them. Call (888) 405-7616 to set up a free estimate.
Whether you’re replacing a leaning wood fence on a south Irving ranch, installing aluminum along a Las Colinas shared wall, or repairing a gate that’s sagging on a narrow drive, the estimate is the first step. Call (888) 405-7616 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Garland.