Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Garland Homeowners
A fence is the one home improvement you look at every single day, and in Garland it does more than mark a property line. It holds dogs in, keeps the alley traffic out, and blocks the view of a neighbor’s cluttered side yard. When a fence is leaning, rotted at the post base, or missing half its pickets, the whole yard looks tired no matter how much time you put into the lawn. Our technicians have up to 10 years of experience setting posts and building fence lines across Garland, and they’ll walk the property with you before anything gets ordered. We’re licensed and insured, estimates are free, and every quote is written line by line so you know what the material, tear-out, and labor will cost before we start. Same-day estimates are often available when you call early. Call (888) 405-7616 and we’ll get the measurements going.
What Our Fence Installation Service Includes
Whether you’re replacing a tired wood line or starting fresh around a new pool, we cover every material and style a Garland yard calls for. Here’s what each one involves.
Wood Fence
Wood is still the most requested fence in Garland, and for good reason: it’s the classic privacy fence, and it can be stained, painted, or left to weather gray. You need wood when you want height, privacy, and a natural look that matches mature trees. We build with cedar or treated pine, set posts below the frost-free depth our local soil allows, and space pickets so the fence keeps its line as the wood dries. We source fence lumber from brands like Barrette, so the board and picket sizing matches what you see in the catalog, not a substitute.

Chain Link Fence
Chain link is the practical choice for a side yard, a dog run, or a backyard that needs to stay secure without blocking light. You need it when budget and visibility matter more than style, or when you’re fencing a large lot. We install galvanized and vinyl-coated chain link with proper tension bands and rail ends, and we set gates so they swing clean without dragging. It’s a straightforward installation, and we’ll tell you honestly when it’s the better value for the job.

Vinyl Fence
Vinyl is the low-maintenance pick, and homeowners who are tired of re-staining every couple of years tend to land here. You need vinyl when you want privacy and a clean, finished look without annual upkeep. We install Bufftech and ActiveYards vinyl profiles, which come in privacy, picket, and ranch rail styles, and we set them on posts with reinforced rails so they hold their shape through a Texas summer. Vinyl installation in Garland typically runs $3,500 to $9,000 based on the linear footage and style.

Aluminum Fence
Aluminum is the go-to for a front yard, a pool surround, or any spot where you want a fence that reads as ornamental rather than utilitarian. You need aluminum when you want a clean sight line, a decorative top, or a code-compliant pool barrier. We install aluminum from Jerith and ActiveYards in black, bronze, and white, with welded or racked panels depending on your grade, and we check every gate latch for a smooth close. Aluminum installation in Garland is typically $4,000 to $10,000 depending on the style and run length.
Iron Fence
Iron fencing is heavier and more substantial than aluminum, and it’s the material for a homeowner who wants a truly permanent front line. You need iron when security and curb presence are the priority, or when you’re matching an existing wrought-iron gate or railing. We handle iron installation with proper post depth and welded connections, and we powder-coat or paint to keep rust from creeping in at the weld seams. Iron work demands patience and the right equipment, and we take it one run at a time.
Fence Repair
Not every fence needs replacing. A rotted post at the bottom of a slope, a gate that’s dropped, a storm that pushed over a section, all of these can often be repaired rather than rebuilt. We inspect the whole line before recommending repair, since a fence with three failing posts is usually better replaced than patched. If a repair will get you several more years, we’ll say so and do the repair. You can read more about our broader fence installation work across the area if you’re unsure which direction to go.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with the material lines homeowners ask for by name, because a fence is a long-term purchase and the brand behind the profile tells you how it will hold up. Bufftech and ActiveYards vinyl are on our list because their privacy and picket profiles are built to hold color and shape in Texas heat, and we know which of their styles work best for a Garland lot line that runs into a slope. Jerith aluminum is another one we install regularly; their ornamental panels are clean and the powder coat stands up well, and we know how their rail spacing and gate hardware go together so the install doesn’t fight you later.
That same brand depth is what carries across everything we build, from a driveway to a roofline. Whether you have a Bufftech fence that needs a matching gate, an ActiveYards run you want extended, or an old Jerith panel that needs a new section, we know these lines and can spec the right parts. And if your material isn’t on the list, that’s fine too. Whether you have Bufftech vinyl, Jerith aluminum, or any other make, we can help you plan the next step and get an accurate quote.
Signs You Need Fence Installation Right Now
Fences fail in predictable ways. Here’s what to look for before a small issue becomes a full rebuild.
- Leaning posts along one run. If several posts in a row are tipping in the same direction, the post base has failed, usually from soil that holds water. You can often re-set one post, but a whole run is a sign the fence is at the end of its service life.
- Rot or soft spots at the base. Wood wicks moisture at ground level first. Press a screwdriver into the bottom of a post. If it sinks in easily, that wood is gone and the post won’t hold a panel much longer.
- Loose or dragging gates. A gate that sags, sticks on the concrete, or won’t latch is often a sign the gate post has shifted. Left alone, the whole gate frame can pull away from the fence line.
- Missing pickets or panels after a storm. North Texas wind events take out fence sections, and a fence that’s already weak gives first. Once a line is breached, the whole run is exposed to more wind load.
- A fence that no longer matches the lot line or HOA rules. If you’ve moved the property line, added a pool, or your HOA has updated its fence standards, your existing fence may need to be replaced to keep you compliant.
Our Fence Installation Process – Step by Step
- 1
On-site walk and measurement. We walk the property with you, measure every run, and note grade changes, sprinkler heads, utility lines, and gate locations. That’s where we catch the slope issues that make a fence look crooked later.
- 2
Material and layout selection. You choose the material and style from our brand lines, and we show you how each one affects the price. You choose the material; we bring the expertise on spacing, post depth, and panel direction.
- 3
Written line-item estimate and permitting. You get a written estimate that breaks down material, labor, tear-out, and any permits. We pull the permits needed and pass the inspections, so your fence meets local code and stays off the neighbor’s property line.
- 4
Tear-out and installation. We remove the old fence, set the new posts with proper concrete footings, and build the line panel by panel. We check every post for plumb as we go and leave the site clear at the end of each day.
- 5
Final walk and warranty walkthrough. We walk the finished fence with you, check every gate and latch, and hand over the workmanship warranty. If anything needs a tweak, we come back and take care of it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Garland?
Fence installation in Garland typically costs $3,500 to $9,000 for vinyl and $4,000 to $10,000 for aluminum, and the written estimate sets the final price. A typical vinyl privacy fence in Garland runs in the $3,500 to $9,000 range depending on the linear footage, the number of gates, and whether the old fence has to come out first. Aluminum ornamental fencing for a front yard usually lands in the $4,000 to $10,000 range, driven by style, run length, and gate hardware.
What moves the price: total linear feet, the number of gates, the condition of the old fence, and any slope or rocky ground that needs extra post work. A larger lot with two drive gates and a pool surround costs more than an open back line, and a fence built over old concrete footings needs extra labor. You avoid overpaying by getting a written line-item estimate up front, so you can see what each part of the job costs and not just one lump number.
Every free estimate is no-obligation and includes the exact material callouts, the linear footage, and permit costs where they apply. We don’t do change orders after the fact. The price you sign is the price the job is built to.
Fence Installation Near Garland – Our Service Area
We work with homeowners across Garland and the nearby communities. Our reach includes fence installation in Richardson and fence installation in University Park, plus Dallas, Highland Park, Plano, Addison, Allen, Farmers Branch, Carrollton, Hutchins, and Irving. Response for an on-site estimate in Garland is typically same-day when you call before the afternoon, and we schedule outside Garland based on the project area. If you’re not sure whether your address is in our range, call and we’ll tell you straight.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Garland
Fence installation is the process of setting posts and building a fence line around a property boundary, a yard, a pool, or a driveway. It covers choosing the material, measuring the runs, setting the posts to local depth and grade, and hanging gates so they close properly. In Garland, that also means pulling any permits the city requires and making sure the fence lands on the right side of the property line. We handle all of it under one contractor, from the first measurement to the final gate check.
Most residential fence installations in Garland take one to three days once the material is on site and any permits are in hand. A straight wood privacy run on a level lot often goes in a single day, while a larger aluminum job with multiple gates or a tricky grade may stretch to three. The written estimate includes the expected timeline, and we confirm the start date and completion window before we order material. Call (888) 405-7616 and we’ll give you a realistic timeline for your property.
Fence installation in Garland typically runs $3,500 to $9,000 for vinyl and $4,000 to $10,000 for aluminum, and the written estimate sets the final price. The exact cost depends on linear footage, style, number of gates, and whether old fence removal is part of the job. A free in-person estimate will give you the line-item breakdown, material callouts, and any permit cost. Call (888) 405-7616 for an exact quote, estimates are free.
Yes, we install Jerith aluminum, Bufftech vinyl, and ActiveYards vinyl, along with Barrette wood fence material. These are some of the brands homeowners request most often, and we know their profiles, gate hardware, and panel sizing. If you have a brand in mind that isn’t on that list, tell us when you call and we’ll confirm whether we can source it. Estimates are free and written line by line.
Same-day estimates are often possible in Garland when you call early in the day. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. If you call outside dispatch hours, we’ll book you into the next opening. Call (888) 405-7616 and we’ll find the earliest slot for your estimate.
Our fence installations come with a workmanship warranty covering post setting, panel alignment, and gate operation. The manufacturer’s warranty on the fence material itself comes from the brand: Bufftech, Jerith, ActiveYards, and Barrette all offer their own material coverage, and we walk you through what’s covered when we hand over the paperwork. If something we installed isn’t holding up the way it should, we come back and fix it. Ask for the warranty details when you get your written estimate.
Clear the fence line of furniture, grills, garden hoses, and anything you don’t want moved, and unlock any gates the crew needs to use. Mark any sprinkler heads or landscape lighting in the fence path, and let your neighbor know if the fence runs along a shared line. Move pets indoors for the installation days. Beyond that, you don’t need to do anything: we handle tear-out, hauling, and site cleanup.
Schedule Your Fence Installation Service in Garland Today
You don’t have to guess what a new fence will cost or when it can be built. Construction Garland covers fence installation for every style and lot in Garland, backed by brand access, a written line-item estimate, and a workmanship warranty. The estimate is free, there’s no obligation, and we answer 24/7. Call (888) 405-7616, fast dispatch from 7am to 7pm, Sunday through Friday, and let’s get your fence line measured.
Written by the team at Construction Garland.