Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Garland Homeowners
A driveway that’s cracked, rutted or washing out at the edges is the first thing anyone notices about a Garland home, and the hardest thing to live with once the damage spreads. Clay-heavy soil and the heavy summer sun here work on pavement nonstop, and what starts as a hairline crack near the garage apron usually turns into a loose slab or a puddle at the street within a season or two. Our technicians have up to 10 years of experience with paver, concrete and asphalt surfaces, and we bring design-grade materials from Belgard, Unilock, Techo-Bloc and Cambridge Pavers to driveways, patios and walkways across Garland. We can often get a crew out the same day to look at your surface, and our phone line is answered around the clock. Call (888) 405-7616 to line up a free estimate.
What Our Driveway & Pavers Service Includes
Every hardscape job starts with the same question: what’s underneath, and what do you want the surface to do. We look at base prep, drainage and how water moves off the property before we ever talk about material. Then we build to the material you pick, from driveway & pavers replacements to a single patio out back.
Paver Driveways
Paver driveways are set brick by brick or stone by stone on a compacted base, and they’re the most forgiving surface when the ground shifts. You’ll want them when you’re after a warmer, more designed look than poured concrete, or when a section of your current driveway has settled and you’d rather not tear out the whole thing. We lay pavers from Belgard, Unilock and Techo-Bloc over a properly excavated, compacted base so the joints stay tight and the surface drains away from the garage.

Concrete Driveways & Concrete Work
Concrete is the workhorse surface for Garland driveways, poured in a single continuous slab with control joints to manage cracking. It makes sense when you want a clean, low-maintenance finish at a lower entry price than pavers. We set forms, control joint spacing and slope so water runs to the street, and we pour with a mix suited to the local ground rather than a one-size slab.

Asphalt Driveways & Resurfacing
Asphalt is the budget-friendly option for a long run from the street to the garage, laid hot and compacted for a smooth black finish. It’s a good fit when you want a full driveway done quickly and plan to seal it periodically. We resurface over sound existing asphalt where the base is still solid, and we tear out and rebuild where it isn’t.

Driveway Repair & Replacement
Not every failing driveway needs a full tear-out. Repair covers cracks, settled slabs, broken aprons and damaged edges, while replacement is the call when the base itself has failed. We assess the base first, because patching a surface over bad ground only buys you a season. If replacement is the honest answer, we tell you that up front.
Patios, Walkways & Pool Decks
The same hardscape work that goes into a driveway goes into the patio, the front walk and the pool deck. These are the surfaces you actually stand on and entertain around, so base prep and drainage matter just as much as the material. We build patios and walkways in pavers and stamped concrete that tie into the driveway and the house.
Brick Paver Driveway
Brick pavers bring a traditional, high-end look that holds up well against Texas heat and heavy use. They suit homeowners who want the surface to age with character rather than crack. We lay brick pavers over a full base, cut edges clean at the garage and the street, and set the pattern you choose.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
Paver work is only as good as the material and the manufacturer behind it. We work with Belgard and Unilock for structural pavers, and with Techo-Bloc for its design-forward lines and textured finishes. Each brand lays and handles differently, and we know how their joint patterns and edge restraints perform once they’re set over our local clay. Cambridge Pavers gives us another strong option when a homeowner wants a specific color or shape profile.
We’re not tied to a single supplier, so the material follows your style and budget, not what one yard happens to have on hand. We also use Oldcastle and Quikrete products for base and concrete components where they fit the pour. Whether you’ve settled on Techo-Bloc, Cambridge Pavers or any other line, we can bring it to your Garland driveway. You pick the material; we bring the expertise.
Signs You Need Driveway & Pavers Right Now
- Cracks spreading from the edges. Cracks that widen each season usually mean the base is moving or water is getting under the slab. Left alone, they let more water in and speed up the failure.
- Puddles that sit for days after rain. Water pooling in the middle of a driveway points to a slope or drainage problem, not just a low spot. It’s a sign the surface isn’t shedding water the way it should, and that shortens the life of any pavement.
- Loose, rocking or shifting pavers. When individual pavers move underfoot, the base or the joint sand has given way. That’s fixable early, but a rocking section spreads if you keep driving over it.
- Settled slabs or a sunken apron at the garage. A step down where the driveway meets the garage is a trip hazard and lets water run toward the door. It usually means the sub-base has washed out or compacted unevenly.
- Faded, rough or crumbling surface. Asphalt that’s gone gray and gritty or concrete that’s spalling at the surface is telling you the top layer is worn out. Sealing or resurfacing at this stage is far cheaper than waiting for structural failure.
Our Driveway & Pavers Process – Step by Step
- 1
On-site assessment. We walk the surface, check the base by probing and looking at how water drains, and measure the actual square footage. This is where we find out whether you’re looking at a repair or a replacement, and we tell you straight.
- 2
Written line-item estimate. You get a free estimate that breaks down material, base work, labor and any tear-out, so you can see exactly what you’re paying for. No change orders once the number is set.
- 3
Base prep and excavation. We remove the old surface where needed, excavate to depth, and compact a proper gravel base in lifts. This is the part nobody sees, and it’s what keeps a driveway from failing in a couple of years.
- 4
Install and finish. Pavers are laid in the pattern you picked, concrete is formed and poured with control joints, or asphalt is laid hot and rolled. Edges, restraints and joint sand are finished to hold the surface in place.
- 5
Final walkthrough. We walk the finished driveway with you, check drainage and clean up. Permits are pulled and inspections passed where the city requires them, and the work carries a workmanship warranty.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Garland?
Driveway and paver pricing in Garland depends mostly on the material, the square footage and how much base work is needed. A typical paver driveway installation here runs $7,000 – $18,000, while a concrete driveway installation runs $4,500 – $12,000. Asphalt driveway paving is the lower entry point at $3,500 – $9,000, and a full driveway replacement lands around $5,000 – $14,000 depending on tear-out and base condition.
| Project | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
What pushes a driveway toward the top of a range: a failed base that has to be excavated and rebuilt, tight access for equipment, extra drainage work, and premium paver lines or patterns. To avoid overpaying, get the base prep spelled out in writing and never accept a per-square-foot quote that skips excavation. Our free estimate includes the material, the base work, the tear-out and the finish, and the written estimate sets the final price. Call (888) 405-7616 for yours.
Driveway & Pavers Near Garland – Our Service Area
We work driveways and pavers across Garland and the surrounding communities, including Richardson, University Park, Dallas, Plano and Farmers Branch. Neighboring cities like driveway & pavers work in Richardson and driveway & pavers near University Park get the same base-prep-first approach. If you’re a little farther out in Allen, Irving or Carrollton, call and we’ll confirm scheduling. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Garland
It’s the design, installation and repair of hard outdoor surfaces: paver, concrete and asphalt driveways, patios, walkways, pool decks, brick paver driveways and sealing. The work covers base prep, drainage, material choice and finish. In Garland that means building surfaces that handle our clay soil and heavy summer sun. Call (888) 405-7616 and we’ll walk your project through it.
A driveway sealing job is usually done in a day, and a small patio or walkway takes a few days. A full paver or concrete driveway installation typically runs several days to about a week, depending on square footage, base work and material. We give you a realistic timeline with the written estimate so you can plan around it.
Typical estimated ranges here are $4,500 – $12,000 for a concrete driveway, $7,000 – $18,000 for a paver driveway, $3,500 – $9,000 for asphalt, and $250 – $700 for sealing. A paver patio runs $3,500 – $11,000. The written estimate sets the final price, and the estimate is free. Call (888) 405-7616 for an exact quote.
Yes. We work with Techo-Bloc, Cambridge Pavers, Belgard, Unilock, Oldcastle and Quikrete, and we know how each line sets and wears over our local ground. Whether you’ve picked a brand or you’re still deciding, we can help you choose the right material. Call (888) 405-7616 to talk through options.
Yes, we can often get a crew to assess your surface the same day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (888) 405-7616 to schedule.
Yes, the work carries a workmanship warranty, and the written estimate sets the price, so there are no change orders once we start. We pull permits and pass inspections where the city requires them. If something unexpected turns up during excavation, we stop and talk it through before doing anything. Call (888) 405-7616 with questions.
Clear vehicles and anything stored on the driveway before the crew arrives, and move what you can away from the edges where equipment will work. Keep pets and kids off the surface while it’s being built. We handle the tear-out, base work and cleanup, so beyond clearing your stuff, there isn’t much for you to do. Call (888) 405-7616 to confirm your start date.
Schedule Your Driveway & Pavers Service in Garland Today
One contractor, every project. From the driveway to the roofline, Construction Garland handles paver, concrete and asphalt work under one accountable team. Whether you need a cracked apron repaired or a full paver driveway installed, we’ll give you a free, no-obligation estimate with the base prep spelled out in writing. Call (888) 405-7616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re comparing options, our Construction Garland team handles the rest of the exterior too, including fence installation and home additions & ADU projects.
Written by the team at Construction Garland.